Psyclone PSC47 HDMI HD Selector

Psyclone PSC47 HDMI HD Selector

User Ratings and Reviews

5 Stars Makes Life Easier
This is a simple solution to a nagging problem: not enough inputs on my HDTV and AV receiver. The problem is really more complicated than that: I have an old rear projection HDTV that has a single DVI input and an old AV receiver that does not have HDMI inputs at all. I was getting along by routing signals–HDMI, component, and optical audio–all over and setting up a Harmony 676 remote to control everything. It works but is very user unfriendly. If one of the setup signals is blocked, the system would be a mess and my wife would call me to “fix the TV.” Clearly, leaving the TV and receiver in a default mode and switching inputs is the way to go.

Enter the Psyclone PSC47. This may be the only HDMI switch that also switches optical audio, too. People who only need to add additional HDMI inputs will probably find that the other HDMI switches are smaller and cheaper and are all that’s needed. But for those who also need to switch optical audio, this is a godsend. It’s set up so that the HDMI and optical audio from each device are sent to the switch. The HDMI output is then put through a DVI adapter connected to the TV. The optical audio is sent to the AV receiver. That’s it. It’s simple and works. I’ve been leaving the PSC47 on, but it could be switched on with the AV receiver.

This system also allows names to be added to the different inputs. It’s a little painful entering all the characters but is worth the effort when finished. This system works similarly to the Psyclone PSC01, which is a component video switcher I use to switch among different gaming systems (Wii, V.Smile, and V.Smile Baby).

There really aren’t any negatives. The display lights up but then turns dark after a few minutes. Some may prefer it to always remain on. The gain on each input is adjustable but I haven’t needed to change any yet. Definitely recommended if you require optical switching. Worth getting if under $50 for those who only need to switch HDMI signals.

4 Stars Good product
This is a good product. It is compatible with 1.3a, and provides some abilities to customize the unit. If the unit doesn’t give a clear picture, try adjusting the gain. I’m using this until I get a receiver that has more HDMI inputs…

5 Stars Most Versatile HDMI Switch on the Market
I researched all the HDMI switches I could find, but since this was the only one I could find locally (BestBuy) I purchased it…and I’m so glad I did! This is the only HDMI switch available that also has a 4-port optical audio splitter as well, which is very convenient since many receivers have only one optical audio input. An unnecessary, but nice bonus, is the ability to re-label the disply, so instead of INPUT1, INPUT2, INPUT3 and INPUT4 you can have TV, APPLE TV, DVD, or whatever you want displayed.

I’m not one who likes a lot of unnecessary lights on my equipment, especially bright ones, so I was very pleased with the auto shut-off of the display after a few seconds…very thoughtful feature, and it comes back on whenever the unit is activated by the remote or front buttons. The unit also is perfectly compatible with all the Harmony remotes, so it can be integrated into my audio/video activities to turn on or shut off whenever I desire. Also, it is the same width as all rack-mounted audio/video equipment, so you can stack it however you want…the case is very sturdy and with no need for heat dissipation, there are no holes or grilles to worry about covering.

Considering the PCS47 costs only about $50 more than a typical three input manual or auto HDMI switch, I think it’s well worth it, especially considering the extra features you get.

The only CON in the deal is support, which hopefully won’t be needed. Psyclone is one of today’s typical companies that hides behind a website devoid of any way to contact them other than email, but we all should be getting used to that with most products today.

Buy/More Info

Related posts:

1. HM 501 5 PORT HDMI SWITCH w remote control HDMI and power cable for HDMI input output HM 501 5 PORT HDMI SWITCH w remote control HDMI and power cable for HDMI input output 5X1 Enhanced HDMI Switch with built-in Equalizer. The HDMI Switcher allows access to multiple HDMI devices, such as DVD players and Satellite set-top boxes to one HDMI display. It’s a best choice for home theater systems and dual [...]...
2. HDMI 3 Port Gold Platted Switch Switcher w IR Remote For HDTV Direct TV PS3 LCD Plasma HDMI 3 Port Gold Platted Switch Switcher w IR Remote For HDTV Direct TV PS3 LCD Plasma The 3×1 HDMI Switcher routes high definition video (in multiple resolutions up to 1080p) and digital audio from any one of the three sources to display unit. Three inputs accommodate the simultaneous connection of up to three high [...]...
3. 5 port HDMI switch with Remote Control 5 in 1 out 5 port HDMI switch with Remote Control 5 in 1 out User Ratings and Reviews 5 Stars Very reliable – excellent value This unit works great for switching HDMI inputs. I am using all 5 device ports and they all make solid connections to a 75foot HDMI cable run to my video projector. I found [...]...
4. Kinamax HDMI 8548 3 Port HDMI Selector Switch Box for HDTV 1080p with Remote Control Kinamax HDMI 8548 3 Port HDMI Selector Switch Box for HDTV 1080p with Remote Control This HDMI 1 x 3 Switch high definition Video (in multiple resolutions up to 1080p) and digital audio from any one of the Three sources to display unit. Three inputs accommodate the simultaneous connection of up to Three high definition [...]...
5. Dish Network Dish Pro VideoPath MULTI DISH SWITCH DP34 Dish Network Dish Pro VideoPath MULTI DISH SWITCH DP34 The Dish Pro VideoPath MULTI-DISH SWITCH DP34 is used with the DishPro or Super Dish Antennas to combine three satellite locations with four unique receivers (can connect up to 12 receivers by cascading additional switches together). NOTE–This unit is designed to work only with Dish Network [...]...